REMOVAL
Removal / installation · Vehicles built from Aug 2013
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. REMOVE REAR WHEEL |
| 2. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY |
Remove the bolt and disconnect the No. 3 parking brake cable assembly.
| 3. REMOVE LOWER CONTROL ARM ASSEMBLY LH |
Remove the nut and bolt from the rear axle housing.

- HINT:
- Turn the bolt while holding the nut.
Remove the nut, bolt and lower control arm assembly.

- HINT:
- Turn the bolt while holding the nut.
