INSTALLATION
Removal / installation · Vehicles built from Aug 2013
| 1. TEMPORARILY INSTALL REAR LATERAL CONTROL ROD ASSEMBLY |
Temporarily install the lateral control rod assembly with the bolt and nut.
Temporarily install the bolt.
| 2. STABILIZE SUSPENSION |
Lower the vehicle.
Bounce the vehicle up and down several times to stabilize the suspension.
| 3. TIGHTEN REAR LATERAL CONTROL ROD ASSEMBLY |
Tighten the 2 bolts.

- Torque:
- 130 N*m{ 1326 kgf*cm , 96 ft.*lbf }
- HINT:
- Turn the bolt while holding the nut.
