ON-VEHICLE INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT REAR WASHER NOZZLE SUB-ASSEMBLY (w/ Back Door Tire Carrier) |
With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.
- Standard:
- Washer fluid hits the windshield in the area shown in the illustration.


- Standard:
Area
Specified Condition
Area
Specified Condition
A
30.5 mm (1.20 in.)
B
28.3 mm (1.11 in.)
C
50.9 mm (2.00 in.)
D
455.5 mm (17.9 in.)
E
500.1 mm (19.7 in.)
F
146.1 mm (5.75 in.)
G
84.6 mm (3.33 in.)
H
420.5 mm (16.6 in.)
I
496.4 mm (19.5 in.)
J
35.9 mm (1.41 in.)
- HINT:
- If the result is not as specified, replace the rear washer nozzle.
| INSPECT REAR WASHER NOZZLE SUB-ASSEMBLY (w/o Back Door Tire Carrier) |
With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.
- Standard:
- Washer fluid hits the windshield in the area shown in the illustration.


- Standard:
Area
Specified Condition
Area
Specified Condition
A
42.7 mm (1.68 in.)
B
21.5 mm (0.847 in.)
C
65.5 mm (2.58 in.)
D
426.6 mm (16.8 in.)
E
505.5 mm (19.9 in.)
F
140.5 mm (5.53 in.)
G
3.6 mm (0.142 in.)
H
412.8 mm (16.3 in.)
I
494.9 mm (19.5 in.)
J
50.4 mm (1.98 in.)
- HINT:
- If the result is not as specified, replace the malfunctioning rear washer nozzle.
