INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT CRUISE CONTROL MAIN SWITCH ASSEMBLY |
Measure the resistance (for vehicles without vehicle-to-vehicle distance control mode).


Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
1 (ECC) - 3 (CCS)
Neutral
1 MΩ or higher
1 (ECC) - 3 (CCS)
+RES
235 to 245 Ω
1 (ECC) - 3 (CCS)
-SET
617 to 643 Ω
1 (ECC) - 3 (CCS)
CANCEL
1509 to 1571 Ω
1 (ECC) - 3 (CCS)
Main switch off
1 MΩ or higher
1 (ECC) - 3 (CCS)
Main switch on
Below 2.5 Ω
- If the result is not as specified, replace the cruise control main switch assembly.
Measure the resistance (for vehicles with vehicle-to-vehicle distance control mode).


Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
1 (ECC) - 2 (R/N)
1 (ECC) - 3 (CCS)
Neutral
1 MΩ or higher
1 (ECC) - 3 (CCS)
+RES
235 to 245 Ω
1 (ECC) - 3 (CCS)
-SET
617 to 643 Ω
1 (ECC) - 3 (CCS)
CANCEL
1509 to 1571 Ω
1 (ECC) - 3 (CCS)
Main switch off
1 MΩ or higher
1 (ECC) - 3 (CCS)
Main switch on
Below 2.5 Ω
3 (CCS) - 2 (R/N)
Main switch on and mode switch on
Below 2.5 Ω
- If the result is not as specified, replace the cruise control main switch assembly.
