REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD) |
![]() ![]() |
for LHD:
Remove the screw.
Detach the 2 clips and 2 guides and remove the No. 1 instrument panel under cover.
Disconnect each connector.
for RHD:

Remove the screw.
Detach the 3 clips and 2 guides and remove the No. 1 instrument panel under cover.
Disconnect each connector.
| 2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD) |
![]() ![]() |
for LHD:
Remove the screw.
Detach the 2 clips and 2 guides and remove the No. 1 instrument panel under cover.
Disconnect each connector.
for RHD:

Remove the screw.
Detach the 3 clips and 2 guides and remove the No. 1 instrument panel under cover.
Disconnect each connector.
| 3. REMOVE TIRE PRESSURE WARNING RESET SWITCH |
Disconnect the connector.


Text in Illustration *A
for LHD
*B
for RHD
Detach the 2 claws and remove the tire pressure warning reset switch from the No. 1 instrument panel under cover sub-assembly.

