2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

OPERATION CHECK

Troubleshooting · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


ENTER DIAGNOSTIC MODE
  1. Enter diagnostic mode (Click here).


REAR Check

HINT:
  1. Use the remote control for each inspection.
  2. This mode checks the color display on the television display assembly.
  3. Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.
  4. The television display assembly is not a touch panel type. Do not touch the screen.

  1. Color Bar Check

    1. E284340
      Select "Color Bar Check" from the "REAR Check" screen.

    2. E284341
      Select a color bar from the "Color Bar Check Mode" screen.

    3. Check the display color.

      HINT:
      1. The entire screen turns to the color or stripe which is selected.
      2. The screen returns to the "Color Bar Check" screen if the remote controller is operated again.

  2. Remote Commander Check

    1. E284342
      Select "Remote Commander Check" from the "REAR Check" screen.

    2. E284343
      Operate each switch and check that the switch name and condition are correctly displayed.

  3. Start Screen Language

    1. E284344
      Select "Start Screen Language" from the "REAR Check" screen.

    2. E284345
      Select the screen language.

← OPERATION CHECK (Aug 2013 – Jul 2014)PROBLEM SYMPTOMS TABLE (Aug 2013 – Jul 2014) →