2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE UPPER RADIATOR SUPPORT SEAL
  1. Remove the 13 clips and upper radiator support seal.


2. REMOVE RADIATOR GRILLE
  1. Remove the radiator grille (Click here).


3. REMOVE COOLER THERMISTOR (AMBIENT TEMPERATURE SENSOR)

E196292
  1. Disconnect the connector.

  1. Using a screwdriver, detach the clamp and remove the sensor.

    HINT:
    Tape the screwdriver tip before use.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →