2013-2015 Land Cruiser Prado · Service Manual Brake

REASSEMBLY

Removal / installation · Vehicles built from Aug 2013


1. INSTALL MASTER CYLINDER RESERVOIR GROMMET
  1. Apply a light coat of lithium soap base glycol grease to 2 new master cylinder reservoir grommets.

  1. Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir assembly.


2. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
  1. Install the brake master cylinder reservoir to the brake master cylinder body.

  1. Using a pin punch and hammer, install a new pin to the brake master cylinder reservoir.


3. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

4. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

5. INSTALL BRAKE FLUID INFORMATION LABEL
← INSPECTION (from Aug 2013)INSTALLATION (Aug 2013 – Jul 2014) →