B279C Theft Deterrent System Presence Detection
Diagnostic trouble codes · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
If an ECM that is incompatible with the engine immobiliser system is installed, the ECM stores this DTC.| DTC Code |
DTC Detection Condition |
Trouble Area |
| B279C |
An ECM for vehicles without an engine immobiliser system is installed to a vehicle with an engine immobiliser system. |
ECM |
INSPECTION PROCEDURE
- NOTICE:
- When the ECM is replaced, refer to the Service Bulletin.
| 1. REPLACE CURRENT ECM WITH PROPER ECM |
Replace the current ECM with the proper ECM.
- for 2TR-FE (Click here)
- for 1GR-FE (Click here)
- for 1KD-FTV (Click here)
- for 2TR-FE (Click here)
| NEXT | |
| 2. REGISTER ECU - ECM COMMUNICATION ID |
Register the ECU - ECM communication ID (Refer to the Service Bulletin).
| NEXT | ||
| ||
