2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH

B239582E01
  1. Check the seat cushion heater.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      A-1 - B-1
      Seat cushion heater temperature 20°C (68°F)
      3.4 to 4.2 Ω
      A-4 - B-2
      A-1 - A-4
      A-2 - A-3
      8 to 12 kΩ

      If the result is not as specified, replace the seat cushion heater assembly.
      Text in Illustration 
      *1
      Connector A
      *2
      Connector B
      *a
      Component without harness connected
      (Front Seat Cushion Heater)


INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH

B239583E01
  1. Check the seat cushion heater.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      A-1 - B-1
      Seat cushion heater temperature 20°C (68°F)
      3.4 to 4.2 Ω
      A-4 - B-2
      A-1 - A-4
      A-2 - A-3
      8 to 12 kΩ

      If the result is not as specified, replace the seat cushion heater assembly.
      Text in Illustration 
      *1
      Connector A
      *2
      Connector B
      *a
      Component without harness connected
      (Front Seat Cushion Heater)

← REMOVAL (from Aug 2014)INSTALLATION (Aug 2013 – Jul 2014) →