2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

REPLACEMENT

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE FRONT WIPER BLADE

  1. B243069E01
    Open the front wiper blade holder.
    Text in Illustration 
    *1
    Front Wiper Blade
    *2
    Front Wiper Blade Holder
    *3
    Front Wiper Arm

  1. Remove the front wiper blade from the front wiper arm as shown in the illustration.

    NOTICE:
    Do not bend the front wiper arm with the front wiper blade removed because the arm tip could damage the windshield surface.


2. REMOVE WIPER RUBBER

  1. E125259
    Remove the wiper rubber and wiper rubber backing plates from the front wiper blade.

  1. E196562
    Remove the 2 wiper rubber backing plates from the wiper rubber.


3. INSTALL WIPER RUBBER

  1. E196529
    Install the 2 wiper rubber backing plates to the wiper rubber.

    NOTICE:
    1. Align the protrusions on the wiper rubber and the notches of the backing plates.
    2. Align the curves of the backing plates and the glass.

  1. E190095
    Install the wiper rubber to the front wiper blade as shown in the illustration.

    NOTICE:
    Push the wiper rubber into the wiper blade strongly to engage them securely.


4. INSTALL FRONT WIPER BLADE

  1. E196528E02
    Install the front wiper blade as shown in the illustration.
    Text in Illustration 
    *1
    Front Wiper Blade Holder

← COMPONENTS (from Aug 2013)COMPONENTS (from Aug 2013) →