2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT HEADLIGHT CLEANER SWITCH ASSEMBLY

E204130E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    5 - 8
    Headlight cleaner switch on
    Below 1 Ω
    Headlight cleaner switch off
    10 kΩ or higher

  1. Connect the positive (+) lead of the battery to terminal 7 (ILL+) and the negative (-) lead to terminal 6 (ILL-).

  1. Check that the headlight cleaner switch assembly illumination comes on.

    OK:
    The headlight cleaner switch assembly illumination comes on.

    If the result is not as specified, replace the headlight cleaner switch assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Headlight Cleaner Switch Assembly)

← REMOVAL (from Aug 2014)INSTALLATION (Aug 2013 – Jul 2014) →