2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE FRONT WHEEL

2. REMOVE FRONT FENDER MUDGUARD LH (for LHD)

B236298
  1. Remove the 2 clips and 4 screws.

  1. Remove the front fender mudguard.


3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH (for LHD)

  1. B362698
    Remove the bolt and 3 screws from the front fender splash shield sub-assembly LH.

  1. B362699
    Detach the 12 grommets and remove the front fender splash shield sub-assembly LH.

    HINT:
    The grommets need to be replaced with new ones because they will break when they are removed.


4. REMOVE WIRELESS DOOR LOCK BUZZER (for LHD)

  1. B239783
    Disconnect the connector.

  1. Detach the clamp and remove the wireless door lock buzzer.


5. REMOVE FRONT FENDER MUDGUARD RH (for RHD)

HINT:
Use the same procedure described for the LH side.


6. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH (for RHD)

  1. B362695
    Remove the bolt and 3 screws from the front fender splash shield sub-assembly RH.

  1. B362696
    Detach the 13 grommets and remove the front fender splash shield sub-assembly RH.

    HINT:
    The grommets need to be replaced with new ones because they will break when they are removed.


7. REMOVE WIRELESS DOOR LOCK BUZZER (for RHD)

  1. B239787
    Disconnect the connector.

  1. Detach the clamp and remove the wireless door lock buzzer.

← COMPONENTS (from Aug 2013)INSTALLATION (from Aug 2013) →