INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH) |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 (+) - 4 (E)
Unlock position
Below 1 Ω
1 (+) - 4 (E)
Lock position
10 kΩ or higher
2 (HWM+) - 3 (HWM-)
Always
Below 1 Ω
Text in Illustration *a
Component without harness connected
(Hood Lock Assembly (Engine Hood Courtesy Switch))
*b
Lock Position
*c
Unlock Position
