Warning/Indicator
Item
|
Details
|
BEAM indicator light
 
|
Receives BEAM indicator light signals from the main body ECU (CAN).
|
DOOR warning light
 
|
The open door indicator comes on when a signal is received from the main body ECU (CAN).
|
FRONT FOG indicator light*1
 
|
The indicator turns on when a FRONT FOG illumination command signal is received (CAN).
|
REAR FOG indicator light*2
 
|
The indicator turns on when a REAR FOG illumination command signal is received (CAN).
|
SRS warning light
 
|
Receives malfunction signals from the center airbag sensor (CAN).
|
Front seat belt warning light
 
|
- Receives driver seat belt signals (unfastened) from the main body ECU (CAN).
- Receives front passenger seat belt signals (unfastened) from the front seat inner belt RH*24, LH*25 (Direct line).
|
Brake warning light
 
|
- Comes on when the parking brake switch is on (CAN).
- Comes on when the brake fluid level warning switch is on (Direct line or CAN).
|
ABS warning light
 
|
Receives malfunction signals from the skid control ECU (CAN).
|
CHARGE warning light
 
|
Receives malfunction signals from the generator (Direct line and/or CAN).
|
MIL
 
|
Receives malfunction signals from the ECM (Direct line).
|
FUEL warning light
 
|
Receives signals from the fuel sender gauge indicating low or no fuel (Direct line).
|
SLIP indicator light*3
 
|
Receives malfunction signals from the skid control ECU (CAN).
|
VSC OFF indicator light*3
 
|
Receives VSC OFF signals from the skid control ECU (CAN).
|
TRC OFF indicator light*3
 
|
Receives TRC OFF signals from the skid control ECU (CAN).
|
TAIL indicator light
 
|
The indicator turns on when a taillight illumination signal is received (CAN).
|
Turn signal indicator light (LH/RH)
 
|
Receives a turn signal from the flasher relay (Direct line).
|
PPS warning light
 
|
Receives power steering warning signals from the power steering ECU (CAN).
|
Master warning light*5
 
|
Receives warning signals from sensors and ECUs (Direct line and CAN).
|
SIL indicator (UP/DOWN)*6, *7, *8
 
|
Receives a shift signal from the ECM (CAN).
|
Eco Driving Indicator Light*9
 
|
Receives an ecology lamp indicator signal from the ECM (CAN).
|
Glow indicator*7, *10
 
|
Receives a glow signal from the ECM (Direct line or CAN).
|
Cruise indicator*11
 
|
Receives a cruise control switch signal from the ECM (CAN).
|
Cruise set indicator*11
 
|
Receives a cruise control switch signal from the ECM (CAN).
|
SPEED LIMIT indicator light*12
 
|
The indicator turns on when a vehicle speed signal is received (CAN).
|
Downhill assist control indicator light*13
 
|
Receives Downhill assist control signals from the skid control ECU (CAN).
|
CRAWL indicator light*14
 
|
Receives CRAWL signals from the skid control ECU (CAN).
|
A/T OIL TEMP indicator light*9
 
|
Receives Automatic transmission signals from the ECM (CAN).
|
T-BELT warning indicator light*4, *7, *10
 
|
Illuminates when odometer's display is 150000 km
|
Oil Maintenance warning indicator light*4, *6, *7
 
|
Receives oil maintenance signal from the ECM (CAN).
|
Multi-terrain Select indicator light*14
 
|
Multi Terrain Select signals from the driving support switch control ECU (CAN).
|
Clearance Sonar indicator light*15
 
|
Receives clearance sonar indicator light signals from the parking assist ECU (CAN).
|
Center Differential Lock indicator light
 
|
Receives center differential lock signals from four wheel drive control ECU.
|
Rear Differential Lock indicator light*23
 
|
Receives rear differential lock signals from four wheel drive control ECU.
|
4LO indicator light
 
|
Receives 4LO indicator light signals from the four wheel drive control ECU (CAN).
|
Oil pressure warning light
 
|
Receives an oil pressure warning light signal from the oil pressure switch. (Direct Line)
|
SEDIMENT/FILTER warning light*7, *16
 
|
Receives the sedimenter signal /fuel filter signal from the fuel sedimenter switch/fuel filter switch.
|
SEDIMENT warning light*10
 
|
Receives the sedimenter signal from the fuel sedimenter switch (Direct Line)
|
Key indicator light*17
 
|
Receives a key signal from the Certification ECU (CAN).
|
OIL LEVEL warning light*7, *18
 
|
Receives an oil level signal from the engine oil level sensor (Direct Line).
|
2nd START indicator light*9
 
|
Receives a 2nd START switch ON signal from the ECM (CAN).
|
PCS indicator light*20
 
|
Receives a PCS indicator light signal from the seat belt control ECU (CAN).
|
Radar cruise indicator light*21
 
|
Receives radar cruise indicator signals from the driving support ECU (CAN).
|
Kinetic dynamic suspension system indicator light*22
 
|
Receives kinetic dynamic suspension system signals from the kinetic dynamic suspension system control ECU (CAN).
|
BSM indicator light*26
 
|
Receives BSM indicator light signals from the blind spot monitor sensor LH (CAN).
|
Headlight beam level control system warning light*19
 
|
Receives headlight beam level control system warning light signals from the Headlight swivel ECU (CAN).
|
LED headlight warning light*19
 
|
Receives LED headlight warning light signals from the main body ECU (CAN).
|
Tire pressure warning light*27
 
|
Receives tire pressure warning light signals from the tire pressure monitor receiver (Direct Line).
|
Washer level warning light*4*28
 
|
Warning is displayed when the washer level is low (Direct Line).
|