2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. REMOVE BACK WINDOW STAY ASSEMBLY LH

  1. B238986E01
    Using a screwdriver, remove the 2 stop rings as shown in the illustration, and then remove the back window stay.

    CAUTION:
    Remove the back window stay while supporting the back door with one hand.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape


2. REMOVE BACK DOOR STAY BOLT

B242842E01
  1. Remove the back door stay bolt.

← COMPONENTS (from Aug 2013)INSTALLATION (from Aug 2013) →