2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE LOWER STEERING COLUMN COVER

  1. E198970
    Turn the steering wheel to the left as necessary to remove the screw.

  1. E198974
    Turn the steering wheel to the right as necessary to remove the screw.

  1. E202443
    for Power Tilt and Power Telescopic:

    1. Remove the screw.

  1. B243928
    Detach the 2 claws and remove the lower steering column cover.


2. REMOVE UPPER STEERING COLUMN COVER

  1. E202160
    Detach the 4 clips and claw to remove the upper steering column cover.


3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

  1. E202158
    w/ Rain Sensor:
    Disconnect the connector.

  1. E202159
    w/o Rain Sensor:
    Disconnect the 2 connectors.

  1. Detach the claw and remove the windshield wiper switch assembly.


4. REMOVE UNLOCK WARNING SWITCH ASSEMBLY

  1. B239930
    Disconnect the unlock warning switch connector.

  1. Detach the 3 claws and remove the cover.

  1. B239931E01
    Remove the pin cap.
    Text in Illustration 
    *1
    Pin Cap
    V100135
    Slide

  1. Remove the unlock warning switch.

← COMPONENTS (from Aug 2013)INSPECTION (from Aug 2013) →