2013-2015 Land Cruiser Prado · Service Manual
Engine / Hybrid System
Home
›
Engine / Hybrid System
› 2TR-FE EMISSION CONTROL › AIR INJECTION DRIVER
REMOVAL
Removal / installation
·
Vehicles built from Aug 2013
1. REMOVE AIR INJECTION CONTROL DRIVER WITH BRACKET
Disconnect the 2 air injection control driver connectors.
Remove the bolt and air injection control driver with bracket.
2. REMOVE AIR INJECTION CONTROL DRIVER
Remove the 2 screws and air injection control driver.
← COMPONENTS (from Aug 2013)
INSTALLATION (from Aug 2013) →