2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT POWER STEERING OIL PRESSURE SWITCH
  1. Check the oil pressure switch.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Powertrain / Engine and ECT / Data List / Power Steering Switch.

    5. Start the engine.

    6. Read the value displayed on the intelligent tester.

      OK:
      Condition
      Specified Condition
      Power steering operating
      ON
      Power steering not operating
      OFF

      If the result is not as specified, check the wire harness and connector. If the wire harness and connector are normal, replace the power steering oil pressure switch.

← COMPONENTS (from Aug 2013)REMOVAL (from Aug 2013) →