REASSEMBLY
Removal / installation · Vehicles built from Aug 2013
| 1. INSTALL RELEASE CYLINDER BLEEDER PLUG |
Install the bleeder plug to the cylinder body.
- Torque:
- 11 N*m{ 110 kgf*cm , 8 ft.*lbf }
| 2. INSTALL CLUTCH RELEASE CYLINDER KIT |
Install 2 new cylinder cups to a new piston.
Install a new spring to the piston.
Apply lithium soap base glycol grease to the portions indicated by the arrows in the illustration.

Text in Illustration *1
Lithium soap base glycol grease
Install the piston (with the spring) to the cylinder body.
- NOTICE:
- Do not damage the inside of the cylinder body.
Install the push rod to a new boot.
Install the boot (with the push rod) to the cylinder body.
