2013-2015 Land Cruiser Prado · Service Manual Drivetrain

REASSEMBLY

Removal / installation · Vehicles built from Aug 2013


1. INSTALL RELEASE CYLINDER BLEEDER PLUG
  1. Install the bleeder plug to the cylinder body.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }


2. INSTALL CLUTCH RELEASE CYLINDER KIT
  1. Install 2 new cylinder cups to a new piston.

  1. Install a new spring to the piston.

  1. CL00672E12
    Apply lithium soap base glycol grease to the portions indicated by the arrows in the illustration.
    Text in Illustration 
    *1
    Lithium soap base glycol grease

  1. Install the piston (with the spring) to the cylinder body.

    NOTICE:
    Do not damage the inside of the cylinder body.

  1. Install the push rod to a new boot.

  1. Install the boot (with the push rod) to the cylinder body.

← DISASSEMBLY (from Aug 2013)INSTALLATION (from Aug 2013) →