2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

NOTICE:
Take extra care when handling these precision electronic components.


1. INSTALL TRANSMITTER BATTERY (for Type A)

  1. B107853
    Install a new transmitter battery (lithium battery: CR1632) with the positive (+) side facing upward as shown in the illustration.

    NOTICE:
    1. Be careful not to bend the transmitter battery electrode during insertion.
    2. Keep the transmitter cover interior free of dust and oil.
    3. When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter housing case from being damaged.

  1. Install the transmitter housing cover by pressing down on it.

  1. Insert the emergency key into the transmitter.

  1. Press one of the transmitter switches and check that the LED illuminates.


2. INSTALL TRANSMITTER BATTERY (for Type B)

  1. B311757
    Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

    NOTICE:
    1. Be careful not to bend the transmitter battery electrode during insertion.
    2. Keep the transmitter cover interior free of dust and oil.
    3. When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter housing case from being damaged.

  1. B356207
    Install the transmitter housing cover by pressing down on it as shown in the illustration.

  1. Insert the emergency key into the transmitter.

  1. Press one of the transmitter switches and check that the LED illuminates.

← INSPECTION (from Aug 2013)COMPONENTS (from Aug 2013) →