2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE CENTER BACK DOOR GARNISH

  1. B239438
    Detach the 4 clips and remove the back door center garnish.


2. REMOVE BACK DOOR SIDE GARNISH LH

  1. B239439
    Detach the 2 clips and claw and remove the back door side garnish.


3. REMOVE BACK DOOR SIDE GARNISH RH

  1. B239440
    Detach the 2 clips and claw and remove the back door side garnish.


4. REMOVE REAR SPOILER COVER RH

B236288E01
  1. Put protective tape around the rear spoiler cover.

  1. Using a screwdriver, detach the 2 clips and remove the rear spoiler cover as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape


5. REMOVE REAR SPOILER SUB-ASSEMBLY

  1. B236289
    Disconnect the connector.

  1. B236290
    Remove the 2 grommets and 6 bolts.

  1. Detach the 3 clips and remove the rear spoiler.


6. REMOVE NO. 2 BACK DOOR STIFFENER

B237905E01

HINT:
Use the same procedure to remove the No. 2 back door stiffener on the other side.

  1. Put protective tape around the No. 2 back door stiffener.

  1. Using a clip remover, detach the 2 claws and remove the No. 2 back door stiffener.

    HINT:
    Tape the clip remover tip before use.

    Text in Illustration 
    *1
    Protective Tape

← COMPONENTS (from Aug 2013)DISASSEMBLY (from Aug 2013) →