2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSTALLATION

Removal / installation · Vehicles built from Aug 2013


1. INSTALL CLUTCH SWITCH ASSEMBLY

  1. B237865
    Temporarily install the clutch switch assembly with the adjusting nut.

  1. B237866E01
    Adjust the clutch switch so that the threaded portion of the clutch switch lightly contacts the cushion. Then tighten the adjusting nut and check the contact of the cushion and switch.

    Torque:
    16 N*m{ 163 kgf*cm , 12 ft.*lbf }

    Text in Illustration 
    *1
    Adjusting Nut
    *2
    Cushion

    NOTICE:
    After adjusting the pedal free play, perform the clutch switch assembly adjustment (Click here).


2. INSTALL CLUTCH PEDAL SUPPORT SUB-ASSEMBLY WITH CLUTCH MASTER CYLINDER
  1. Install the clutch pedal support sub-assembly with clutch master cylinder (Click here).

← INSPECTION (from Aug 2013)PRECAUTION (from Aug 2013) →