REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 1. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY |
Detach the 8 claws.

Disconnect each connector and remove the rear console end panel sub-assembly.
| 2. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (w/o Seat Heater System) |
Disconnect the connector.

Remove the 4 screws and air conditioning control assembly.
| 3. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (w/ Seat Heater System) |
Disconnect the connector.

Remove the 4 screws and air conditioning control assembly.
