2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT ENGINE OIL LEVEL SENSOR

A184466E01
  1. Partially immerse the sensor in an oil bath and warm up the oil bath.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (LVL) - 2 (E)
    ON, 20°C (68°F)
    Below 1 Ω
    OFF, 20°C (68°F)
    Below 1 Ω
    ON, 60°C (140°F)
    Below 1 Ω
    OFF, 60°C (140°F)
    10 kΩ or higher

    If the result is not as specified, replace the sensor.

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →