INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT CENTER CLUSTER MODULE SWITCH (ABSORBER CONTROL SWITCH) |
Measure the resistance according to the value(s) in the table below.

- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
8 (ECU2) - 24 (E)
COMFORT position
Below 1 Ω
Normal position
10 kΩ or higher
9 (ECU1) - 24 (E)
SPORT position
Below 1 Ω
Normal position
10 kΩ or higher
If the result is not as specified, replace the center cluster module switch (absorber control switch).Text in Illustration *a
Component without harness connected
(Absorber Control Switch)
