DISASSEMBLY
Removal / installation · Vehicles built from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE DAMPER SERVO SUB-ASSEMBLY |
![]() ![]() |
Remove the 3 screws and damper servo.
| 2. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY |
![]() ![]() |
Remove the 3 screws and motor.
| 3. REMOVE AIR FILTER |
![]() ![]() |
Detach the 2 claws and remove the filter case.
Remove the air filter.




