INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT STEERING PAD SWITCH ASSEMBLY (w/ Audio + Monitor + Tel + Voice + Multi Function + Distance Control) |
Inspect the pad switch.


Text in Illustration *1
Seek+ Switch
*2
Seek- Switch
*3
Volume+ Switch
*4
Volume- Switch
*5
MODE Switch
*6
Off Hook Switch
*7
w/ Voice Switch
*8
On Hook Switch
*9
Menu Switch
*10
ENTER Switch
*11
UP/DOWN Up Switch
*12
UP/DOWN Down Switch
*13
w/ Wide View Front and Side Monitor Switch
*14
w/ Distance Control Switch
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
10 (AU1) - 8 (EAU)
No switch pushed
95 to 105 kΩ
Seek+ switch pushed
Below 2.5 Ω
Seek- switch pushed
313 to 345 Ω
Volume+ switch pushed
950 to 1050 Ω
Volume- switch pushed
2950 to 3265 Ω
9 (AU2) - 8 (EAU)
No switch pushed
95 to 105 kΩ
MODE switch pushed
Below 2.5 Ω
On hook switch pushed
313 to 345 Ω
Off hook switch pushed
950 to 1050 Ω
Voice switch pushed *7
2950 to 3265 Ω
2 (DISP) - 3 (GND1)
No switch pushed
95 to 105 kΩ
Menu switch pushed
Below 2.5 Ω
ENTER switch pushed
313 to 345 Ω
UP/DOWN Up switch pushed
2950 to 3265 Ω
UP/DOWN Down switch pushed
950 to 1050 Ω
7 (+DP) - 3 (GND1)
Wide View Front and Side Monitor switch pushed *13
Below 2.5 Ω
4 (DIST) - 6 (ECC)
Distance Control switch pushed *14
Below 2.5 Ω
Check the illumination.
Connect the battery positive (+) lead to terminals IL+2 and the negative (-) lead to terminals EAU and GND1 of the steering pad switch assembly connector.
Check that the switch illumination comes on.
- OK:
- Steering pad switch illumination comes on.
| INSPECT STEERING PAD SWITCH ASSEMBLY (w/ Audio + Tel) |
Inspect the pad switch.


Text in Illustration *1
Seek+ Switch
*2
Seek- Switch
*3
Volume+ Switch
*4
Volume- Switch
*5
MODE Switch
*6
Off Hook Switch
*7
On Hook Switch
-
-
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
10 (AU1) - 8 (EAU)
No switch pushed
95 to 105 kΩ
Seek+ switch pushed
Below 2.5 Ω
Seek- switch pushed
313 to 345 Ω
Volume+ switch pushed
950 to 1050 Ω
Volume- switch pushed
2950 to 3265 Ω
9 (AU2) - 8 (EAU)
No switch pushed
95 to 105 kΩ
MODE switch pushed
Below 2.5 Ω
On hook switch pushed
313 to 345 Ω
Off hook switch pushed
950 to 1050 Ω
Check the illumination.
Connect the battery positive (+) lead to terminals IL+2 and the negative (-) lead to terminals EAU and GND1 of the steering pad switch assembly connector.
Check that the switch illumination comes on.
- OK:
- Steering pad switch illumination comes on.
| INSPECT STEERING PAD SWITCH RH |
Inspect the pad switch.


Text in Illustration *1
Menu Switch
*2
ENTER Switch
*3
UP/DOWN Up Switch
*4
UP/DOWN Down Switch
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
2 (DISP) - 3 (GND1)
No switch pushed
95 to 105 kΩ
Menu switch pushed
Below 2.5 Ω
ENTER switch pushed
313 to 345 Ω
UP/DOWN Up switch pushed
2950 to 3265 Ω
UP/DOWN Down switch pushed
950 to 1050 Ω
Check the illumination.
Connect the battery positive (+) lead to terminals IL+2 and the negative (-) lead to terminals GND1 of the steering pad RH connector.
Check that the switch illumination comes on.
- OK:
- Steering pad switch illumination comes on.
