2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL ROOF RACK ASSEMBLY LH
  1. Clean the threads of the bolts with non-residue solvent (when reusing the bolts).

  1. Apply adhesive to the threads of the bolts (when reusing the bolts).

    Adhesive:
    Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

  1. Install the roof rack with the 5 bolts.

    Torque:
    23 N*m{ 235 kgf*cm , 17 ft.*lbf }


2. INSTALL FRONT ROOF RACK LEG COVER LH
  1. Attach the 2 guides and 4 claws to install the front roof rack leg cover.


3. INSTALL REAR ROOF RACK LEG COVER LH
  1. Attach the 2 guides and 4 claws to install the rear roof rack leg cover.


4. INSTALL CENTER ROOF RACK LEG COVER LH
  1. Attach the 2 claws to install the center roof rack leg cover.

← REASSEMBLY (from Aug 2013)COMPONENTS (from Aug 2013) →