2013-2015 Land Cruiser Prado · Service Manual Brake

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT PARKING BRAKE SWITCH ASSEMBLY

  1. C217121
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    Switch connector terminal - Switch body
    On (Shaft not pressed)
    Below 1 Ω
    Off (Shaft pressed)
    10 kΩ or higher

    Text in Illustration 
    V100135
    On
    V100136
    Off
    If the result is not as specified, replace the parking brake switch assembly.

← REMOVAL (from Aug 2014)INSTALLATION (Aug 2013 – Jul 2014) →