2013-2015 Land Cruiser Prado · Service Manual General

SERVICE DATA

Specifications · Vehicles built from Aug 2013

Suspension Control System 
Height difference of left and right sides
20 mm (0.787 in.) or less
Fluid temperature is 20°C (68°F)
2.6 to 3 MPa (26.6 to 30.5 kgf/cm2, 377 to 435 psi)
Height Control Compressor 
Tester Connection
Condition
Specified Condition
2 (L) - 1 (B)
15 to 25°C (59 to 77°F)
10 to 14 Ω
Control Valve Assembly 
Tester Connection
Condition
Specified Condition
1 (LH+) - 2 (E)
15 to 25°C (59 to 77°F)
10 to 14 Ω
3 (RH+) - 2 (E)
Height Control Sensor 
Tester Connection
Condition
Specified Condition
3 (SHG) - 2 (SHRR)
3 (SHG) - 2 (SHRL)
High (45°)
4.4 to 4.6 V
Normal (0°)
2.3 to 2.6 V
Low (-45°)
0.4 to 0.6 V
Front Acceleration Sensor 
Tester Connection
Condition
Specified Condition
1 (SGFR) - 2 (SGR)
Sensor stationary
Approx. 2.0 to 2.5 V
Sensor tilted
Changes between approx. 0.9 and 2.3 V
Rear Acceleration Sensor 
Tester Connection
Condition
Specified Condition
1 (SGRR) - 2 (SGND)
Sensor stationary
Approx. 2.0 to 2.5 V
Sensor tilted
Changes between approx. 0.9 and 2.3 V
Absorber Control Actuator 
Tester Connection
Condition
Specified Condition
1 (FAL+) - 2 (FAL-)
Always
6.4 to 7.2 V
3 (FBL+) - 4 (FBL-)
1 (FAR+) - 2 (FAR-)
3 (FBR+) - 4 (FBR-)
← TORQUE SPECIFICATIONS (from Aug 2014)TORQUE SPECIFICATIONS (from Aug 2013) →