2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

TERMINALS OF ECU

System information · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014


PARKING ASSIST ECU
E245334E21
  1. Disconnect the I6 and I7 parking assist ECU connectors.

  2. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    I6-1 (+B) - I6-4 (GND1)
    L - W-B
    Power source signal
    Always
    10 to 16 V
    I6-4 (GND1) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    I6-8 (IG) - I6-4 (GND1)
    L - W-B
    IG Power source signal
    Engine switch on (IG)
    10 to 16 V
    Engine switch off
    Below 1 V
    I6-9 (ACC) - I6-4 (GND1)
    P - W-B
    ACC Power source signal
    Engine switch on (ACC)
    10 to 16 V
    Engine switch off
    Below 1 V
    I7-8 (BLSW) - I6-4 (GND1)
    L - W-B
    Front and side monitor main switch power source signal
    Engine switch on (IG), wide view front and side monitor switch on
    10 to 16 V

  3. Reconnect the I6 and I7 parking assist ECU connectors.

  4. Measure the voltage, resistance and waveform according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    I6-10 (TX-)
    LG
    AVC-LAN communication signal
    -
    -
    I6-11(TX+)
    L
    AVC-LAN communication signal
    -
    -
    I7-36 (BCV-) - I7-35 (BGND)
    W - GR
    Front television camera ground
    Always
    Below 1 V
    I7-12 (BCV+) - I7-35 (BGND)
    R - GR
    Front television camera display signal input
    Engine switch on (IG), wide view front and side monitor switch on and camera lens is not covered, displaying an image
    Pulse generation
    (See waveform 1)
    Engine switch on (IG), wide view front and side monitor switch on and camera lens is covered, blacking out the screen.
    Pulse generation
    (See waveform 2)
    I7-35 (BGND) - I6-4 (GND1)
    GR - W-B
    Front television camera ground (shield)
    Always
    Below 1 Ω
    I7-11 (BCB+) - I7-35 (BGND)
    B - GR
    Power source to front television camera
    Engine switch on (IG), wide view front and side monitor switch on
    5.5 to 7.05 V

  5. E171712E22
    Using an oscilloscope, check waveform.
    Text in Illustration 
    *a
    Waveform 1
    *b
    Waveform 2
    *c
    Synchronized Signal
    *d
    Video Waveform

    HINT:
    The video waveform changes according to the image sent by the front television camera assembly.


    1. Waveform 1

      Measurement Condition 
      Item
      Content
      Terminal No. (Symbol)
      I7-12 (BCV+) - I7-35 (BGND)
      Tool Setting
      200 mV/DIV., 50 μsec./DIV.
      Condition
      Engine switch on (IG), wide view front and side monitor switch on and camera lens is not covered, displaying an image

    2. Waveform 2

      Measurement Condition 
      Item
      Content
      Terminal No. (Symbol)
      I7-12 (BCV+) - I7-35 (BGND)
      Tool Setting
      200 mV/DIV., 50 μsec./DIV.
      Condition
      Engine switch on (IG), wide view front and side monitor switch on and camera lens is covered, blacking out the screen.


NAVIGATION RECEIVER ASSEMBLY (for Navigation Receiver Type) (Click here)

RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type) (Click here)
← PROBLEM SYMPTOMS TABLE (from Aug 2014)TERMINALS OF ECU (from Aug 2014) →