2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH

  1. E283270
    Extend the type 1 headlight washer nozzle sub-assembly LH by hand.

    NOTICE:
    Be careful not to damage the headlight washer actuator sub-assembly or type 1 headlight washer nozzle sub-assembly LH.

  1. Detach the claw and remove the type 1 headlight washer nozzle sub-assembly LH.


2. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH

HINT:
Use the same procedure described for the LH side.

← COMPONENTS (from Aug 2013)INSTALLATION (from Aug 2013) →