2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Aug 2013


1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY

  1. E189683E01
    Using a screwdriver, detach the 4 claws and remove the lens.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

  1. E189685E01
    Using a screwdriver, detach the 2 claws and 2 guides, and remove the 2 covers.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

  1. E189687E01
    Using a screwdriver, detach the 4 claws and disconnect the light as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

  1. E189689
    Using a screwdriver, detach the 4 claws and disconnect the room light switch base from the light.


2. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (w/ Personal Light)

  1. E198059E01
    Using a screwdriver, detach the 4 claws and remove the lens.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

  1. E198060E01
    Using a screwdriver, detach the 4 claws and disconnect the light as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

  1. E198061
    Using a screwdriver, detach the 8 claws and disconnect the room light switch base from the light.

← COMPONENTS (from Aug 2013)INSTALLATION (from Aug 2013) →