REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 1. REMOVE NO. 2 ROOM LIGHT ASSEMBLY |
Using a screwdriver, detach the 4 claws and remove the lens.

- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1
Protective Tape
Using a screwdriver, detach the 2 claws and 2 guides, and remove the 2 covers.

- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1
Protective Tape
Using a screwdriver, detach the 4 claws and disconnect the light as shown in the illustration.

- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1
Protective Tape
Using a screwdriver, detach the 4 claws and disconnect the room light switch base from the light.

| 2. REMOVE NO. 2 ROOM LIGHT ASSEMBLY (w/ Personal Light) |
Using a screwdriver, detach the 4 claws and remove the lens.

- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1
Protective Tape
Using a screwdriver, detach the 4 claws and disconnect the light as shown in the illustration.

- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1
Protective Tape
Using a screwdriver, detach the 8 claws and disconnect the room light switch base from the light.

