INSTALLATION
Removal / installation · Vehicles built from Aug 2013
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. INSTALL FOG LIGHT ASSEMBLY LH |
Attach the 2 guides to install the fog light assembly LH.
Install the 2 screws.
Connect the connector.
| 2. INSTALL FRONT BUMPER REINFORCEMENT STOPPER RH (for RH Side) |
Attach the 2 claws to install the front bumper reinforcement stopper RH.
| 3. INSTALL FRONT BUMPER COVER |
| 4. ADJUST FOG LIGHT AIMING |
