2013-2015 Land Cruiser Prado · Service Manual Vehicle Exterior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT CENTER STOP LIGHT ASSEMBLY

  1. E127507E12
    Apply battery voltage to the connector and check the LED illumination condition.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 2 (STOP)
    Battery negative (-) → Terminal 1 (E)
    LED illuminates

    If the result is not as specified, replace the center stop light assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Center Stop Light Assembly)

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →