INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT HEADLIGHT LEVELING SWITCH |
Connect the positive (+) lead of the battery to terminal 1 (B) and the negative (-) lead to terminal 4 (E).

Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection
Switch Condition
Specified Condition
1 (B) - 2 (T)
0
10.4 to 11.2 V
1
8.52 to 9.24 V
2
6.6 to 7.32 V
3
4.68 to 5.4 V
4
2.76 to 3.48 V
5
0.84 to 1.56 V
Apply battery voltage to the connector and check the LED illumination condition.
- OK:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 3 (ILL+)
Battery negative (-) → Terminal 4 (E)
LED illuminates
Text in Illustration *a
Component without harness connected
(Headlight Leveling Switch)
