2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

Does not Play even after Bluetooth Audio Mode is Selected

Circuit diagnosis · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

INSPECTION PROCEDURE

HINT:
  1. Even if the portable player can play audio content, it may not be able to play via the in-vehicle device. This does not necessarily indicate a malfunction of the in-vehicle device.
  2. When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


1. CHECK OPERATION
  1. Check if the portable player operates normally.

    OK:
    The portable player operates normally.



NG
MALFUNCTION IN PORTABLE PLAYER
OK


2. CHECK AUDIO SETTINGS
  1. Set volume, fader and balance to the initial values and check that the sound is normal.

    OK:
    Audio system returns to normal.

    HINT:
    Sound quality adjustment measures vary according to the type of amplifier.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK


3. CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL
  1. Check if the "Bluetooth" audio player plays normally on another "Bluetooth" audio compatible vehicle of the same model.

    OK:
    "Bluetooth" audio player plays normally.



NG
MALFUNCTION IN PORTABLE PLAYER
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Does not Play even after Bluetooth Audio Mode is Selected (Aug 2013 – Jul 2014)Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device (Aug 2013 – Jul 2014) →