2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

U0100 Lost Communication with ECM

Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014

Also covers:

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

The air conditioning amplifier communicates with the ECM, main body ECU (multiplex network body ECU) and combination meter through the CAN communication system.
DTC Code
DTC Detection Condition
Trouble Area
U0100
Lost communication with the ECM.
  1. CAN communication system
  2. ECM
U0142
Lost communication with the main body ECU.
  1. CAN communication system
  2. Main body ECU (multiplex network body ECU)
U0155
Lost communication with the combination meter.
  1. CAN communication system
  2. Combination meter assembly

INSPECTION PROCEDURE


1. CHECK FOR DTC (CAN COMMUNICATION SYSTEM)
  1. Use the intelligent tester to check if the CAN communication system is functioning normally.

    Result 
    Result
    Proceed to
    CAN DTC is not output
    A
    CAN DTC is output (for LHD with Entry and Start System)
    B
    CAN DTC is output (for LHD without Entry and Start System)
    C
    CAN DTC is output (for RHD with Entry and Start System)
    D
    CAN DTC is output (for RHD without Entry and Start System)
    E



B
GO TO CAN COMMUNICATION SYSTEM (Click here)

C
GO TO CAN COMMUNICATION SYSTEM (Click here)

D
GO TO CAN COMMUNICATION SYSTEM (Click here)

E
GO TO CAN COMMUNICATION SYSTEM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)


← B14A3 Front Passenger Side Solar Sensor Short Circuit (from Aug 2014)U0100 Lost Communication with ECM (+ U0142, U0155) (from Aug 2014) →