INSPECTION
Inspection · Vehicles built from Aug 2013
| INSPECT CENTER CLUSTER MODULE SWITCH (HEIGHT CONTROL OFF SWITCH) |
Measure the resistance according to the values in the table below.

- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
5 (N) - 24(E)
Height control OFF switch pressed
Below 1 Ω
Height control OFF switch not pressed
10 kΩ or higher
If the result is not as specified, replace the center cluster module switch (height control OFF switch).Text in Illustration *a
Component without harness connected
(Height Control OFF Switch)
