2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

B15A0 LAN Master Malfunction

Diagnostic trouble codes · Vehicles built from Aug 2014

Also covers:

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

These DTCs are stored when a malfunction occurs in the navigation receiver assembly.
DTC Code
DTC Detection Condition
Trouble Area
B15A0
When either of the conditions below is met:
  1. Bus malfunction
  2. EEPROM error
Navigation receiver assembly
B15AD
When one of the conditions below is met:
  1. Short to ground or +B, or open occurs in gyro signal circuit
  2. Gyro sensor malfunction
  3. GPS receiver malfunction
B15B0
Picture circuit (TFT unit) malfunction
B15B3
When one of the conditions below is met:
  1. AM tuner PLL is unlocked
  2. FM tuner PLL is unlocked
  3. Tuner malfunction
B15B5
When one of the conditions below is met:
  1. Mechanical communication error
  2. Load/Eject malfunction
  3. Read malfunction
  4. Mechanical malfunction
B15B7
"Bluetooth" module malfunction

INSPECTION PROCEDURE


1. CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    No DTCs are output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)


← B15A0 LAN Master Malfunction (+ 5 more codes) (Aug 2013 – Jul 2014)B15A3 Stereo Component Amplifier Malfunction (Aug 2013 – Jul 2014) →