INSTALLATION
Removal / installation · Vehicles built from Aug 2013
- HINT:
- When installing the symbol emblem and back door name plate, heat the vehicle body, symbol emblem and back door name plate using a heat light.
- Standard:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Symbol Emblem
20 to 30°C (68 to 86°F)
Back Door Name Plate
20 to 30°C (68 to 86°F)
- NOTICE:
- Do not heat the vehicle body, symbol emblem or back door name plate excessively.
| 1. INSTALL SYMBOL EMBLEM |
![]() ![]() |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new symbol emblem.
Using a heat light, heat the vehicle body and a new symbol emblem.
Remove the peeling paper from the face of the symbol emblem.
- HINT:
- After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Align the boss positions and install the symbol emblem.
- HINT:
- Press the symbol emblem firmly to install it.
Text in Illustration *1
Boss
| 2. INSTALL BACK DOOR NAME PLATE |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install a new back door name plate.
Using a heat light, heat the vehicle body and a new back door name plate.
Remove the peeling paper from the face of the back door name plate.
- HINT:
- After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the back door name plate in the position shown in the illustration.


Text in Illustration *a
Reference Values
*b
Back Door Relief
*c
Back Door End Line
-
-

