2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH

  1. E177527E01
    Apply battery voltage to the connector and check the LED illumination.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 2 (+B)
    Battery negative (-) → Terminal 1 (GND)
    LED illuminates

    If the result is not as specified, replace the front door inside handle illumination light assembly LH.
    Text in Illustration 
    *a
    Component without harness connected
    (Front Door Inside Handle Illumination Light Assembly LH)


INSPECT NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY

  1. E177527E02
    Apply battery voltage to the connector and check the LED illumination.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 1 (+B)
    Battery negative (-) → Terminal 2 (GND)
    LED illuminates

    If the result is not as specified, replace the No. 2 interior illumination light sub-assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (No. 2 Interior Illumination Light Sub-assembly)

← REMOVAL (from Aug 2014)INSTALLATION (Aug 2013 – Jul 2014) →