2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Aug 2013


INSPECT MAP LIGHT ASSEMBLY

  1. E140936E18
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    21 (+B1) - 15 (GND1)
    Spot light switch off
    10 kΩ or higher
    Spot light switch on
    Below 1 Ω
    21 (+B1) - 1 (CTY)
    Not door position
    10 kΩ or higher
    Door position
    Below 1 Ω

    If the result is not as specified, replace the map light assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Map Light Assembly)

← REMOVAL (from Aug 2013)INSTALLATION (from Aug 2013) →