2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL AIRBAG CUTOFF SWITCH CYLINDER SUB-ASSEMBLY
  1. Attach the 2 claws to install the cutoff switch cylinder.


2. INSTALL INSTRUMENT SIDE PANEL RH
  1. Connect the connector.

  1. Attach the 5 clips, claw and 3 guides to install the instrument side panel.


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


4. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).

← INSPECTION (from Aug 2013)INSTALLATION (from Aug 2014) →