INSTALLATION
Removal / installation · Vehicles built from Aug 2014
Versions by build date: Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR |
Attach the 2 claws to install the sensor.

Connect the connector.
| 2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY |
Install the instrument panel safety pad sub-assembly (Click here).
