REMOVAL
Removal / installation · Vehicles built from Aug 2013
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- When removing the stripe tape, heat the vehicle body and stripe tape using a heat light.
- Standard:
Item
|
Temperature
|
Vehicle Body
|
40 to 60°C (104 to 140°F)
|
Stripe Tape
|
20 to 30°C (68 to 86°F)
|
- NOTICE:
- Do not heat the vehicle body or stripe tape excessively.
| 1.
REMOVE FENDER STRIPE LH |
 |
Pull back an edge of the stripe tape and pull it parallel to the vehicle body to remove it.
| 2.
REMOVE FRONT SIDE PANEL STRIPE LH |
 |
Pull back an edge of the stripe tape and pull it parallel to the vehicle body to remove it.
| 3.
REMOVE REAR BODY STRIPE LH |
 |
Pull back an edge of the stripe tape and pull it parallel to the vehicle body to remove it.
| 4.
REMOVE QUARTER STRIPE REAR UPPER LH |
 |
Pull back an edge of the stripe tape and pull it parallel to the vehicle body to remove it.
| 5.
REMOVE QUARTER STRIPE LH |
 |
Pull back an edge of the stripe tape and pull it parallel to the vehicle body to remove it.