2013-2015 Land Cruiser Prado · Service Manual Engine / Hybrid System

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Aug 2013


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / Cruise Control / DTC.

  5. Check for DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / Cruise Control / DTC.

  5. Clear the DTCs.

← DIAGNOSIS SYSTEM (from Aug 2013)FAIL-SAFE CHART (from Aug 2013) →